Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

13.06.2025 07:28

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

First Sentence:

Edit 2024–10.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

What does it feel like to "lose your looks" to age?

nine

so, what happens?

The other is “what does a “fuse” do?”

What started the whole idea of femboys? What is the whole point of a femboy? Did a boy or a man just randomly start dressing or acting feminine or something?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Why did my crush like me for only two days in a row?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

This is where the MOV conducts again, and dissipated the energy.

but I think this circuit , shows a few more pieces.

Do you suck dicks with no reciprocation?

what exactly is a ‘surge’ protector?

Barnstars:

An AC voltage/ current source, and an ac inductive load.

Does having the wrong address on my car insurance invalidate my policy?

One

This device then solves the entire problem.

[image of Common-mode choke]

Why do men love swallowing more then women? Is it just because women just don't try eating CUM? they be missing some delicious CUM.. Life is short and women are missing out of lots of enjoyment..

He then describes Rainy Season and Lightning.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

In schematic diagrams this is the symbol for a fuse:

Why do people keep complaining about how some people copy and paste the question before answering it? To me, it's very disturbing and makes me want to block and mute them as annoying whiners.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

These devices are installed between the “hot” and “neutral” and protective ground.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Why are people with Asperger syndrome unenthusiastic?

The bolt then partially travels down the line to your home.

Here is a simplified AC power diagram.

Because the load is inductive, the current lags the voltage.(by a bit).

What steps have you taken to stop being a targeted individual by gang stalkers? What has worked, what would you have done differently?

He then asserts :

but this device (an Inductor) … impedes the rapid changes in the current.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

How does growing up in chaos affect a child as they become an adult?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Can the fuse protect the electronic devices from lightning instead of a surge protector.

2024–10–10[John johnson John Johnson ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

But… the neutral is now “floating” because of the 1 ohm resistance.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Now when you have a certain ac resistance, then a current flows in a loop.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

He then describes the function of a fuse.

A fuse is a non-resetable over current circuit protector.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

I post the exact comment here.

A circuit breaker is similar, but is resettable.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

At one ohm, the resistor has a maximum of 1 watt power.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

What does a fuse do?

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

At least they know the answer if they wanted it.

This is where this question deviates from being a 'generic' question, and becomes more specific.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

There are two important concepts here.

(Dc diagram shown, AC is similar).

So, the voltage could go up to 500 volts, and the fuse will not open up.

One is “what exactly is in a ‘surge protector’ ? ”

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

There are three different concepts here that are getting confused.

The third is lightning and “how it gets conducted into a home.”

a photo is worth a thousand words.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

For this case there are devices called Metal oxide varistors (MOV).

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

It also is a device that limits the change in current flow.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

[old diagram got deleted by accident]

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This is 'the assistant's answer'

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

But it can get overloaded, and no longer works.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

the problem then depends on "how fast does the fuse operate?".

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

This one hit behind the barn.

These are simplified answers to the original question, and does not change anything I wrote above.

eight

Upvotes:

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

2024–10–16 [ OO OLAOYE OYEBODE ]

It seems Mohan does not understand the difference between a comment and an Answer.

What is lightning?

This is the picture of an electronic coil of wire wound around a core of magnetic material.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).